Electric scooters often start repairing equipment on their own.
And when removing the soundboard, their attention is immediately attracted by the smart BMS display. Smart bms should have it by definition.
The Smart BMS Board has light diodes installed, so the Board has a light indication. The light and the way this light diode is lit indicates the presence or absence of breakdowns in the circuit of the electric scooter.
BMS electric scooter from different manufacturers has a different light indication.
Xiaomi breakdowns are characterized by a red light. The blue color of the backlight indicates that the Board is working properly. But the discontinuity or non-discontinuity of the blue signal is also important.
Only if the Board flashes a bright blue light (the light selected by the manufacturer to indicate the operating state), this is an indicator of system health.
The absence of an indication on the smart BMS clearly indicates that it is not working properly.
And so, the blue flashing signal BMS for Xiaomi – indicator of proper operation of the system!


Электросамокатчики часто приступают к ремонту техники самостоятельно.
И при демонтаже деки их внимание сразу привлекает индикация смарт БМС. У smart bms она должна быть по определению.
На Смарт БМС платы установлены световые диоды, поэтому плата имеет световую индикацию. Свет и то, как горит этот световой диод, указывает на наличие или отсутствие поломок в цепи электросамоката.
БМС электросамокате у разных производителей имеет разную световую индикацию.
Для поломок Xiaomi характерен красный свет. Синий цвет подсветки сигнализирует об исправной работе платы. Но и прерывность или не прерывность синего сигнала важна.
Только, если плата мигает рабочем синим светом (светом выбранным производителем для характеристики рабочего состояния), это показатель исправности системы.
Отсутствие индикации на smart BMS однозначно свидетельствует о не исправности.
И так, синий мигающий сигнал БМС для Xiaomi – показатель исправной работы системы!